Scaffolding Inspection Checklist
Date
*
-
Month
-
Day
Year
Date
Is this a Subcontractor or IWS employee/affiliate filling out the form
*
Yes
No
State
*
Project Name
*
Project Number
*
Name
*
First Name
Last Name
Email
*
example@example.com
Is this a written Inspection
Yes
No
Photos
Browse Files
Drag and drop files here
Choose a file
Cancel
of
General Rules for Scaffolds
Rows
Yes
No
N/A
Comments
Has the scaffold been setup according to manufacturer’s instructions?
Scaffold components can support at least four times their maximum intended load.
Scaffold is fully planked with no more than 1” gap between planks.
Platform is at least 18 inches wide.
Guardrails are used if work height is >6 feet.
Guardrail system includes: Toprail, Midrail, Toeboard, Posts.
Scaffold is 14” or less from face of work (if guardrails are removed).
Planks do not extend past the ends of the scaffold frames more than 6 inches unless cleated.
Work platform is free of clutter, mud, oil, or any tripping hazard.
Scaffolding is more than 10’ from any power line.
If any piece of scaffold is defective, it has been removed from serve and tagged.
Height to base with ratio is less than 4:1 (no braces required)
If ratio is more than 4:1, scaffolds are restrained from tipping by tying or bracing.
All scaffold frames and uprights use base plates, (mudsills if on dirt).
Footings are level, sound, and rigid. No settling has occurred.
Unstable objects such as blocks, bricks, buckets, etc. are not used as work platforms or to support scaffolds.
End frames used for access have rungs lined up vertically for the entire height of the scaffold.
There is no more than 2’ step up or down or a 14” step across to get on or off a platform.
First rung of the ladder is not more than 24” above the ground.
Ladder’s rung length is at least 8”.
Cross braces are not used for climbing up or down from the scaffold.
Submit
Should be Empty: